I admit it: I'm a total geek. I love electronics, programming, 3D art, vintage Apple hardware, and whisky. I'm always juggling half a dozen projects. I also enjoy documenting it all: my successes, my failures, my experiences... and everything geeky along the way.

Seeed Studio Fusion - $9.90 for 10pcs 2 layer 10x10cm boards


 
 
 
 
 

3D Art | Kevin Rye.net - Main

Kevin Rye

Geek Extraordinaire. Yeh, I said it.

CRT Clock, Part IV

blogEntryTopper
I love it when everything just comes together at the end and it just works. No hacks, no head scratching, no second spins. It just works. This project involved some serious engineering, and I'm really happy with the way that it's coming out.
Read More...

Printing DAZ 3D Models, Part III

blogEntryTopper
My first "official" 3D print of Mei Lin came out pretty good. However, it could be better. Everything can always be better! Not to mention, I discovered a shortcoming in the ROBO 3D firmware that messes with the z-axis. It's no wonder my last Mei Lin print was only 11" tall! I know I eye-balled the height, but I thought I was pretty darn close to 12 inches. Knowing now that my model was probably "squished", I decided to have another go at printing it. Read More...

Printing DAZ 3D Models, Part II

blogEntryTopper
Continuing with my experiments in printing DAZ 3D models with my 3D printer, I figured I’d up-the-ante with my next print. Seeing as my last attempt was a total success, I wanted to see if I could print a model with clothes…. and twice as large! Read More...

Printing DAZ 3D Models

blogEntryTopper
It's not the main reason I wanted to get a 3D printer, but a big one. I wanted to get a 3D printer in order to print large models of my 3D art creations. I've seen a few people do it online with mixed results. The how-to isn't widely documented and it's not a feature built into DAZ Studio by default. You'd think that printing a simple cube from one app shouldn't be any less difficult than printing a human-shaped figure from another. Unfortunately, it's easier said than done. Read More...

1972 Playboy Magazine - The "Lenna" Edition


blogEntryTopper
Say hello to the November, 1972 edition of Playboy magazine. What’s so special about this edition? I’ll tell you.... Lena Söderberg - The First Lady of the Internet. Read More...

Printing My 3D Renders


blogEntryTopper
Snapfish had a 99 cent print sale the other day. My wife asked me to go nuts and print a couple hundred 5-star pictures of the kids. I figured while I was at it, I’d throw in a couple of my renders just to see what they looked like printed on photo-quality glossy paper. They came out pretty damn good. Read More...